Bird Feeder Pole Set with Twist-In Ground Socket and Flange Plate for Bottom-Mounting Large Feeders
This bird feeder pole set gives a large feeder a dedicated mounting point in your backyard. Its flange plate supports the feeder from underneath, while the included twist-in ground socket provides the ground connection for the sectional pole.
Made in the USA, this Erva five-piece set includes three tubular pole sections, a flange plate top and a ground socket. The sections have a 1-inch outer diameter and 0.060-inch walls, finished with a polyurethane powder coating and a lead-free black baked-on finish. The flange plate can also bottom-mount a very large birdhouse.
Features
- Five-piece configuration combines three pole sections, a flange plate top and a twist-in ground socket.
- Flange plate top provides bottom mounting for a large feeder or very large birdhouse.
- Tubular pole sections have a 1-inch outer diameter and 0.060-inch wall thickness.
- Polyurethane powder coating and a lead-free black baked-on finish cover the pole.
- Made in the USA.
Specifications
- Set contents: Three pole sections, one flange plate top and one twist-in ground socket
- Pole outer diameter: 1 inch
- Wall thickness: 0.060 inch; identified as 16 gauge in the source
- Mounting method: Flange plate for bottom mounting
- Intended mounting use: Large feeder or very large birdhouse
- Finish: Polyurethane powder coating and lead-free black baked-on finish
- Finished height reference: Approximately 80 inches from ground to the bottom of the hangers
- Country of manufacture: USA
Frequently Asked Questions
What comes in the five-piece bird feeder pole set?
The bird feeder pole set includes three pole sections, a flange plate top and a twist-in ground socket. Together, these make up the five-piece configuration.
How does a feeder attach to this pole?
A large feeder mounts from underneath using the included flange plate top. The same plate is also intended for bottom mounting a very large birdhouse.
What diameter are the pole sections?
The pole sections have a 1-inch outer diameter. Their wall thickness is 0.060 inch, identified as 16 gauge.
Where is the approximately 80-inch height measured?
The approximately 80-inch measurement runs from the ground to the bottom of the hangers. It describes that finished mounting reference rather than the full length of every component.