Flush Lauan Bifold Closet Door, Unfinished Hollow Core Interior Design with Overhead Track and Hardware

This flush lauan bifold closet door brings a clean, contemporary surface to closets, pantries and tight interior spaces. Its unfinished veneer lets you coordinate the door with your room: prepare it properly before painting or staining, or apply a clear top coat to highlight the natural wood appearance.

The hollow core door is 1 3/8 inches thick, and each unit includes an overhead track and hardware. Select from eight nominal widths at a nominal height of 80 inches. Measure the finished opening after Sheetrock installation before ordering; actual door dimensions are smaller than the stated size to allow installation. These doors cannot be trimmed down.

Features

• Flush lauan veneer surface for a contemporary interior appearance
• Unfinished surface can be prepared for painting, staining or a clear top coat
• Bifold design suited to closets, pantries and tight interior spaces
• Hollow core construction
• Overhead track and hardware included for each unit
• Eight nominal widths at a nominal 80-inch height

Specifications

• Product type: Bifold closet door
• Surface: Flush lauan wood veneer
• Core: Hollow core
• Finish: Unfinished; proper preparation required before painting or staining
• Thickness: 1 3/8 inches
• Nominal height: 80 inches (6 feet 8 inches)
• Nominal widths: 18, 20, 21, 24, 28, 30, 32 and 36 inches
• Included components: Overhead track and hardware for each unit
• Trimming: Cannot be trimmed down
• Sizing allowance: Actual dimensions are smaller than nominal dimensions
• 24 × 80-inch nominal size example: Each panel measures 11 13/16 inches wide; actual door height is 79 inches

Frequently Asked Questions

Does this bifold closet door arrive painted or stained?

This lauan bifold closet door arrives unfinished. Prepare the surface properly before painting or staining, or use a clear top coat to showcase the natural wood appearance.

Can I trim this hollow core bifold door to fit?

This hollow core bifold door cannot be trimmed down. Measure your finished opening carefully and select a suitable nominal size before ordering.

How should I measure for the bifold door?

Measure the finished opening from side to side and top to bottom after Sheetrock has been installed. The stated door sizes are nominal; actual dimensions are smaller to allow installation.

Are the overhead track and hardware included?

An overhead track and hardware are included for each bifold unit. The door itself has a hollow core and is 1 3/8 inches thick.

Can two units fit a 60 × 80-inch finished opening?

Two nominal 30 × 80-inch bifold units are the source's sizing example for an exact 60 × 80-inch finished opening. Confirm your finished opening measurements before selecting the units.