Silver Mirror Acrylic Sheets in 1/8-Inch Thickness for Custom Cutting and Engraved Craft Designs

Silver mirror acrylic sheets bring traditional mirror-like color to cut and engraved craft designs without the weight of a traditional mirror. The 1/8-inch material provides a reflective finish for custom shapes and projects.

Choose a sheet dimension for your project or select the 2 x 2-inch sample square to evaluate the material first. Remove the clear plastic film and apply paper masking to both sides before processing to help protect the silver backing. Test a small area because results vary with machine type, age and maintenance.

Features

• Silver mirror finish that closely resembles traditional mirror color
• 1/8-inch thickness across the listed material sizes
• Sheet sizes of 12 x 19 inches, 18 x 24 inches and 24 x 35 inches
• Separate 2 x 2-inch sample square for material evaluation
• Suitable for cutting, scoring and engraving workflows
• Paper masking on both sides helps protect the silver backing during processing

Specifications

• Material: Mirror acrylic
• Thickness: 1/8 inch
• Finish: Clear silver mirror
• Sheet sizes: 12 x 19 inches; 18 x 24 inches; 24 x 35 inches
• Sample size: 2 x 2-inch sample square
• Preparation: Remove the clear plastic film and apply paper masking to both sides.
• Processing orientation: Place the silver side up and mirror the design.
• Recommended Glowforge starting setting: Medium Black Acrylic proofgrade setting; test a small area first.
• Recommended 30W Thunder Bolt vector setting: Speed 12; power 75
• Recommended 30W Thunder Bolt score setting: Speed 75; power 6
• Recommended 30W Thunder Bolt engraving setting: Speed 400; power 20
• Processing guidance: Settings are recommendations; results vary with machine type, age and maintenance.

Frequently Asked Questions

Which silver mirror acrylic size should I choose?

Choose the 12 x 19-inch, 18 x 24-inch or 24 x 35-inch sheet that fits your design. A separate 2 x 2-inch sample square is available for evaluating the material.

How should I prepare the acrylic before cutting or engraving?

Remove the clear plastic film and apply paper masking to both sides. This helps protect the silver backing and keeps the plastic covering from melting on the tray.

Which side should face up during processing?

Place the silver side up and mirror your design before cutting or engraving. Test a small area before running the full project.

What starting settings are listed for Glowforge and a 30W Thunder Bolt?

The listed Glowforge starting point is the Medium Black Acrylic proofgrade setting. For a 30W Thunder Bolt, the listed settings are vector speed 12 power 75, score speed 75 power 6, and engraving speed 400 power 20.